Toshiba E-STUDIO5506AC - To Print Using Custom RGB Profiles

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-130
3. Printer-specific Adjustments
3.25.4 To Print Using Custom RGB Profiles

Explanation
In the service tool (e-BRIDGE Color Profile Tool V3.0), RGB source ICC profiles which meet the specific color
reproduction can be created.
By using this created profile, printing with a specific color reproduction is possible.

Procedures
* Only the service technician must use step (1).
* Both the service technician and the user can use steps (2) or later.
(1) Create the RGB source ICC profile for the desired color reproduction using e-BRIDGE Color Profile Tool V3.0.
(2) Access TopAccess and open the "Administration" tab menu. Then upload the desired RGB source profile.
• Follow (a) to (g) below to upload the profile.
(a) Access TopAccess and open the "Administration" tab menu.
(b) Open the "Setup" menu and the "ICC Profile" sub menu.
PS3
XPS
PS3
XPS