Toshiba E-STUDIO5506AC - To Obtain Smooth Gray-Scale Photo Images

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-64
2. Copier-specific Adjustments
2.14 To Obtain Smooth Gray-Scale Photo Images
Before adjustment
After adjustment
Halftones are not accurately reproduced.
Halftones are reproduced better.

Explanation
When a photo image or gradational image is copied in the Black mode with the Text/Photo mode selected,
halftones are not accurately reproduced. Select the Photo mode or the Image smoothing mode from among the
original mode options, in order to reproduce halftones better in the Black mode.

Procedures
* Both the service technician and the user can perform all adjustments.
(1) Press [BASIC] on the Control Panel. Select “PHOTO” from among the original mode options.
* To have “PHOTO” selected from among the original mode options by default, refer to 2.18 To Program
Frequently Used Copy Settings (To Use Custom Mode).
After selecting the Photo mode, copy and check the copy image quality.
If further image quality adjustments are still necessary, use the next procedure.
(2) Press [BASIC] on the Control Panel. Select “IMAGE SMOOTHING” from among the original mode
options.
* To have “IMAGE SMOOTHING” selected from among the original mode options by default, refer to 2.18
To Program Frequently Used Copy Settings (To Use Custom Mode).

Caution after the adjustment
Nothing in particular.