Toshiba E-STUDIO5506AC - To Adjust Custom Mode Settings in Full Color Mode

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-77
2. Copier-specific Adjustments
2.18.2 To Adjust Custom Mode Settings in Full Color Mode
* All the steps in the adjustment procedure shall be performed by the service technician.
(1) Select [08 SETTING MODE]. Change the value for the code [7614] to enable the functions of the custom
mode in the full color mode.
Value for 08-7614
User mode for full color mode
0
Unused
1
Used (Text/Photo base)
2
Used (Text base)
3
Used (Printed Image base)
4
Used (Photo base)
5
Used (Map base)
* The default adjustment value for the custom mode is preset at the one that reproduces the image quality
equivalent to that of Text/Photo in the full color mode at the time of shipment.
After the setting, perform the adjustment accordingly referring to the corresponding chapters.