e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-62
3. Printer-specific Adjustments
3.14.2 To Adjust the Print Image Quality in the Black and White Mode
* Perform the adjustment in accordance with the procedures below.
* Both the service technician and the user can use procedure (1), (2) and (4).
* Only the service technician must use procedures (3) and (5).
(1) Change the "Halftone" option on the printer driver.
For Windows
* This adjustment will have an effect only on Black and white mode printing.
Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab.
Select "Detail" from among the "Halftone" options in the "Basic" tab.
To Next Page
Loading...
