Toshiba E-STUDIO5506AC - To Adjust the Image Density in the Toner Save Mode

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-84
3. Printer-specific Adjustments
3.18 To Adjust the Image Density in the Toner Save Mode
Before adjustment
After adjustment
–
The image density is too dark, even when
printing is performed in the toner save
mode.
The image density in the toner save mode
is adjustable, as desired.

Explanation
The product offers a toner save mode. It is intended to automatically decrease the image density and reduce the
amount of toner used. Adjust the upper limit of the image density in the toner save mode, in order to obtain the
desired image density requested by a particular user.

Procedures
* The service technician must perform all adjustments.