Toshiba E-STUDIO5506AC - To Make the Light-Colored Area Darker on the Printout

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-69
3. Printer-specific Adjustments
3.15 To Make the Light-Colored Area Darker on the Printout
Before adjustment
After adjustment
The light-colored area becomes darker but the
highly colored area becomes blurred.
Only the light-colored area becomes darker.

Explanation
When the entire image is printed darker to make the light-colored area darker, the highly colored area may
become much darker and blurred. To print only the light area in a higher density and leave the dark area as it is,
change the setting for the printer driver and adjust the background and color balance.
Print Print