Toshiba E-STUDIO5506AC - To Eliminate Smudges from Highly Colored Text and Lines (to Prevent Toner Scattering Around Text and Lines Where a Large Amount of Toner Is Used)

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-47
3. Printer-specific Adjustments
3.13 To Eliminate Smudges from Highly Colored Text and Lines
(To prevent toner scattering around text and lines where a large amount
of toner is used)
Before adjustment
After adjustment
Black text looks smudged due to toner
scattering around the text.
Smudges are eliminated.

Explanation
When highly colored text and lines where a large amount of toner is used, created on raster data (image), such as
BMP, GIF, JPEG and TIFF are printed, the text and lines look smudged due to toner scattering around the text
and lines. Adjust the sharpness intensity or the amount of toner used, in order to obtain a clearer print image.
<Hint> If smudged text and lines appear on the print image in PDF format on Adobe Reader, unmark the
“Print as image” checkbox to print out the image. If the “Print as image” checkbox is marked, text
and lines will be printed as raster data (bitmap image) and may be smudged.

Procedures
* Perform the adjustment in accordance with the procedures below.
* Both the service technicians and the users can perform step (1).
* Only the service technicians can perform steps (2) and (3).