e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-48
3. Printer-specific Adjustments
(1) Change the “Use Sharpness Filter” option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Click [Setting] in the “Image Quality” tab.
Uncheck the “Use Sharpness Filter” checkbox in the “Image Attribute” tab.
* Always set “Uncheck”. Setting “-2” or a smaller value may provide blurred print images.
* Sharpness adjustment is not available when 1200 dpi is selected for PS3 printer driver.
To Next Page
Loading...
