e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
ii
Table of Contents
2.23.1 When adjusting the image quality of the Black mode .................................. 2-84
2.23.2 When adjusting the image quality of the Full color mode ............................ 2-85
2.24 To Change Gray Tone ................................................................................ 2-86
2.25 The Color Reproduction of the Back Side Differs from that for the Front Side at
DSDF Scanning .......................................................................................... 2-87
2.26 To Improve the Gradation Reproduction of Dark Portions in Photos .......... 2-88
3. Printer-specific Adjustments
Restrictions on Use of Printer Functions .................................................................. 3-1
3.1 To Maintain a Steady Color Balance ............................................................. 3-2
3.2 To Maintain a Steady Color Balance on Thick Paper or Special Paper ........ 3-4
3.3 To Obtain the Desired Color Balance ........................................................... 3-7
3.4 To Closely Match the Color Balance on the Monitor ................................... 3-15
3.5 To Maintain a Uniform Gray Hue (To maintain Consistency in Gray among
Text, Photos and Graphics) ........................................................................ 3-18
3.6 To Use Only the Black Toner to Reproduce Gray Areas (To use only the black
toner to reproduce black-and-white photos or gradational images) ............ 3-21
3.7 To Easily Adjust the Overall Brightness ...................................................... 3-25
3.8 To Adjust the Overall Saturation ................................................................. 3-28
3.9 To Easily Adjust the Overall Contrast ......................................................... 3-32
3.10 To Obtain a Sharper Print Image ................................................................ 3-35
3.11 To Obtain a Softer Image ............................................................................ 3-39
3.12 To Make Low-resolution Data Look Finer (To soften an image) ................. 3-43
3.13 To Eliminate Smudges from Highly Colored Text and Lines (To prevent toner
scattering around text and lines where a large amount of toner is used) .... 3-47
3.14 To Clearly Print Light-Colored Thin Lines or Text ....................................... 3-53
3.14.1 To Adjust the Print Image Quality in the Color Mode ................................... 3-54
3.14.2 To Adjust the Print Image Quality in the Black and White Mode ................. 3-62
3.15 To Make the Light-Colored Area Darker on the Printout ............................. 3-69
3.16 To Clearly Print Thin Lines/Double Lines .................................................... 3-76
3.17 To Decrease the Image Density and Save Toner (To Print in the Toner Save
Mode) .......................................................................................................... 3-81
3.18 To Adjust the Image Density in the Toner Save Mode ................................ 3-84
3.19 To Print Illegible Gray or Colored Text in Black .......................................... 3-87
3.20 To Ignore Blank Pages for Printing ............................................................. 3-89
3.21 To Sharply Print Black Text ......................................................................... 3-92
3.22 To Prevent Dark Toner from Coming Off .................................................. 3-102
3.23 To Register the Image Quality Adjusted Corresponding to a Preference (To
use the Custom Color Settings) ................................................................ 3-104
3.24 To Print a Full-Color Original in Two Colors .............................................. 3-107
3.24.1 To Adjust Colors ........................................................................................ 3-108
3.24.2 To Adjust the Sharpness ............................................................................ 3-113
3.24.3 To Print a Full-Color Original in Two Colors .............................................. 3-115
3.25 To Use ICC Profile .................................................................................... 3-116
3.25.1 To Create ICC Profiles for Printing on the Paper to be Used .................... 3-117
3.25.2 To Print Precise Colors Using Existing RGB Source ICC Profiles ............. 3-122
3.25.3
To Perform Simulated Printing with CMYK Inks of Each Ink Manufacturer
..... 3-126
3.25.4 To Print Using Custom RGB Profiles ......................................................... 3-130
3.25.5 To Convert Colors with Specified Source ICC Profiles (Not Using Embedded
ICC Profiles) .......................................................................................................... 3-133
3.25.6 To Perform Further Adjustment After Using ICC Profiles .......................... 3-137
To Next Page
Loading...
