Toshiba E-STUDIO5506AC - Page 126

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
2-80
2. Copier-specific Adjustments
(2) Press [USER FUNCTIONS] on the Control Panel. Then press [+] or [-] of [OMIT BLANK PAGE
ADJUSTMENT].
(3) Select [05 ADJUSTMENT MODE]. Change the value for the code [7618] to adjust the threshold for
judging the original as blank pages.
• The larger the setting value is, the more the original tends to be judged as a blank page.
[05] code
Recommended value
Acceptable range value
Default
05-7618
Set a value larger than 128.
0~255
128
* Set the value in increments of approximately 15 until the optimum value is obtained, while checking if
proper originals are judged as a blank page.

Caution after the adjustment
• When the threshold for judging blank pages is changed, the same threshold for in the network scanning
function is also changed.
• Originals with a small portion of small letters may be judged as a blank page. Therefore adjust the value
carefully while checking the copy image.