e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-16
3. Printer-specific Adjustments
Procedures
* Both the service technician and the user can perform all adjustments.
(1) Select “Photograph” from among the “Image Quality Type” options.
* This adjustment will be effective, only if a file created on a general application, such as Microsoft Office,
is printed in PostScript (PS3, XPS and Macintosh). It may not be effective, if a file created on a graphic
application (e.g. Illustrator) or a DTP application (e.g. QuarkXPress) is printed, or a PDF file created on
these applications is printed using the C, M, Y and K toners. Unmark the “Use PostScript Passthrough”
checkbox in the “PostScript Setting” options in the “Others” tab. The “Image Quality Type” option will be
effective, if printing on Windows (PS3) is performed (but not on Macintosh) or if a file created on the
above applications is printed. However, the color balance may be changed, and also the image quality may
be diminished, depending on the type of file.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Select “Photograph” from among the “Image Quality Type”
options.
To Next Page
Loading...
Need help?
General
