e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-20
3. Printer-specific Adjustments
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Select "Color Settings 1" - “Black – Auto” from among the “Pure Black and
Gray” options.
Caution after the adjustment
The adjustment allows gray areas always to be reproduced using all color toners (C, M, Y and K). As a result,
undesired colors may look blended, depending on the print image. Therefore, carefully perform the adjustment,
while checking the printouts.
To Next Page
Loading...
