e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-29
3. Printer-specific Adjustments
Procedures
* Both the service technician and the user can use procedure (1).
* Only if the saturation of R (Red) is still insufficient even after procedure (1) has been used, must the service
technician use procedure (2).
(1) Change the “Saturation” option on the printer driver.
For Windows
Open the property page of the printer driver. Click [Setting] in the “Image Quality” tab.
Change the “Saturation” option in the “Image Attribute” tab.
To Next Page
Loading...
