e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-36
3. Printer-specific Adjustments
Procedures
* Perform the adjustment in accordance with the procedure below.
* Both the service technicians and the users can perform step (1).
* Only the service technicians can perform step (2).
(1) Change the “Sharpness” option on the printer driver.
For Windows
* This adjustment will have an effect only on Auto or Color mode printing.
Open the property page of the printer driver. Click [Setting] in the “Image Quality” tab.
Set the value for “Sharpness” within a range of “1” to “4” in the “Image Attribute” tab.
• Setting “4” provides the sharpest print image.
* Sharpness adjustment is not available when 1200 dpi is selected for PS3 printer driver.
To Next Page
Loading...
