e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-55
3. Printer-specific Adjustments
For Macintosh
* This adjustment will have an effect only on full-color printing.
Open the print dialog box. Change the "Color Settings 1" - "Image Type" and "Halftone" options.
• Set either of the following options, in accordance with the type of original to print:
• Image Type: "Presentation" (To make color darker)
Halftone: "Detail" (To make the halftone screen high frequency)
• Image Type: "Line Art" (To make the color darker and enhance thin lines)
Halftone: "Auto" or "Detail" (To make the halftone screen high frequency)
After changing the options on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, use the next procedure.
To Next Page
Loading...
