Toshiba E-STUDIO5506AC - Page 196

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-60
3. Printer-specific Adjustments
Ex.: • When printing on Windows is performed with the following options selected: PCL6, Image
Quality Type = Presentation, Halftone =Detail
> Change the values for Y: 05-8062, M: 05-8063, C: 05-8064 and K: 05-8065.
• When printing on Macintosh is with the following option selected: Image Type = Line Art,
Halftone = Auto
> Change the values for Y: 05-8054, M: 05-8055, C: 05-8056 and K: 05-8057.
* Printing on Macintosh is performed in PostScript. (See the "PS3" row in the table below.)
Color
to
adjust
PDL Halftpne
[05]
code
Subcode
Recommended
value
Acceptab
le value
range
Default
Y
(Yellow)
PCL6
Detail
05-8062
0/1/2
Set a value larger
than 128.
0 to 255 128
PS3 (600dpi)
Detail
05-8054
0/1/2
PS3 (1200dpi)
Detail
05-8272
0/1/2
XPS
Detail
05-8046
0/1/2
M
(Magenta)
PCL6
Detail
05-8063
0/1/2
PS3 (600dpi)
Detail
05-8055
0/1/2
PS3 (1200dpi)
Detail
05-8273
0/1/2
XPS
Detail
05-8047
0/1/2
C
(Cyan)
PCL6
Detail
05-8064
0/1/2
PS3 (600dpi)
Detail
05-8056
0/1/2
PS3 (1200dpi)
Detail
05-8274
0/1/2
XPS
Detail
05-8048
0/1/2
K
(Black)
PCL6
Detail
05-8065
0/1/2
PS3 (600dpi)
Detail
05-8057
0/1/2
PS3 (1200dpi)
Detail
05-8275
0/1/2
XPS
Detail
05-8049
0/1/2
* Set the value in increments of approximately 20, while checking the printouts until the optimum
value is obtained.
* The value for [05] code for K (black) will affect black-and-white images (including text, lines and
photos) on the printout.
* The subcode varies according to the area where the density is adjusted. Refer to the table below
and set the subcode for the area to be adjusted.
* Whether to fix or change the maximum density in a high-density area can be selected by the setting
of 05-8066.
Subcode
Area where the density is
adjusted
0
Low-density area
1
Medium-density area
2
High-density area