e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-65
3. Printer-specific Adjustments
For Macintosh
* This adjustment will have an effect only on Black and white mode printing.
Open the print dialog box. Set the value for "Color Settings 2" - "Sharpness" within a range of "1" to "4."
• Setting "+4" provides the sharpest print image.
* Initially, set "4" and check the printout. If further image quality adjustments are still necessary, refer to (4)
to do this.
<Hint> In addition to the sharpness adjustment, decreasing "Brightness" (moving to [-] side), changing
"Contrast" or increasing "Saturation" (moving to [+] side) may improve the image quality.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, use the next procedure.
To Next Page
Loading...
