Toshiba E-STUDIO5506AC - Page 207

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
3-71
3. Printer-specific Adjustments
(2) Select [05 ADJUSTMENT MODE]. Increase the values for codes [8010] to [8019] to make the background
density darker.
Resolution Halftone Color mode [05]code
Recommende
d value
Acceptable
value range
Default
600dpi
Smooth
Color
05-8010
Set a value larger
than 128.
0 to 255 128
Twin color
05-8011
Mono color
05-8012
Detail
Color
05-8013
Twin color
05-8014
Mono color
05-8015
1200dpi
Smooth
Color
05-8016
Mono color
05-8018
Detail
Color
05-8017
Mono color
05-8019
* This adjustment will have an effect only on Auto or Color mode printing.
(3) Open the property page of the printer driver. Click [Setting] in the "Image Quality" tab.
Mark the "Detail" checkbox in the "Color Balance" tab. Click [Edit].
Set the value for the Low/Middle density of the color you would like to adjust, within a range of "1" to "4"
in the "Color Balance Details" option.
* This adjustment will have an effect only on printing on a Windows PCL6 or PS3 or XPS emulation printer
driver.
(This adjustment cannot be performed on a Macintosh printer driver.)
* Initially, set "4" and check the printout.
After changing the option on the printer driver, print and check the print image quality.
If further image quality adjustments are still necessary, the service technician must use the next procedure
according to the image type.
• To adjust the color image: Go to procedure (4).
• To adjust the black and white image: Go to procedure (5).
PCL6
PS3
XPS