Toshiba E-STUDIO5506AC - Page 319

e-STUDIO5506AC/6506AC/7506AC (Ver01) © 2016, 2017 TOSHIBA TEC CORPORATION All rights reserved
5-15
5. Scanning-specific Adjustments

Procedures
* The service technician must perform all adjustments.
(1) Select [05 ADJUSTMENT MODE]. Change the values for codes [8314 to 8316] and [8371] to adjust the
black density of a scanned-in image.
Color mode Original mode
[05] code
Recommended value
Acceptable
value range
Default
Full color
Text/Photo
05-8314
Set a value larger than 1.
0 to 4
1
Text
05-8315
Set a value larger than 0. 0 to 4 0
Photo
05-8316
User custom
05-8371
* Setting "0" provides the lightest black, while setting "4" the darkest.

Caution after the adjustment
The adjustment may possibly provide the extremely dark background. Therefore, carefully perform the
adjustment, while checking the scanned-in image.