HX7+ ASD Installation and Operation Manual 163
Group #4 Speed #1
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F561
Parameter Type — Selection List
Factory Default — 9
Changeable During Run — No
Group #4 Speed #2
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F562
Parameter Type — Selection List
Factory Default — 10
Changeable During Run — No
Group #4 Speed #3
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F563
Parameter Type — Selection List
Factory Default — 11
Changeable During Run — No
Group #4 Speed #4
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F564
Parameter Type — Selection List
Factory Default — 12
Changeable During Run — No
Group #4 Speed #5
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F565
Parameter Type — Selection List
Factory Default — 13
Changeable During Run — No
Group #4 Speed #6
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F566
Parameter Type — Selection List
Factory Default — 14
Changeable During Run — No
Group #4 Speed #7
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F567
Parameter Type — Selection List
Factory Default — 15
Changeable During Run — No
Group #4 Speed #8
Program Pattern Run Speeds
Same as #1 Group Speed #1 (see F531).
Direct Access Number — F568
Parameter Type — Selection List
Factory Default — Skip
Changeable During Run — No
Pattern #1 Characteristics
Program Pattern Run Preset Speeds 1
In conjunction with the setting of F585, this parameter is used to set the run-
time of Preset Speed 1 when used as part of a Pattern Run.
Settings:
0 — Time From Start
1 — Time From Reach
2 — No Limit
3 — Until Next Step
Direct Access Number — F570
Parameter Type — Selection List
Factory Default — Time From Start
Changeable During Run — No
F561 F570
To Next Page
Loading...
