50 HX7+ ASD Installation and Operation Manual
RS232/RS485
To use the keypad for control requires that the LCD Port Connection be set to RS232/RS485 to use
this feature.
Communication Card
Routes the control and monitoring I/O to CNU3 of the Control Board of the HX7+ ASD (Option
Card connector).
Motorized Pot
Discrete input terminals may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned discrete input terminal to CC. See
Motorized Pot on pg. 191
for further information on this feature.
Pulse Input (option)
Configures the system to receive pulse input. See PG Speed Reference Setpoint on pg. 116 for
further information on this feature.
To Next Page
Loading...
