4.1 General 4 Replacement Procedures
Installing the B-CAS Card (For JAPAN model only)
Install the memory card according to the following procedures and Figure 4-5, after checking
that the computer is turned off in boot mode.
1. Insert the B-CAS card gently until it stops and is seated securely.
2. Checking that the B-CAS card is seated securely.
After the PC card is installed, check the hardware configuration in the Hardware Setup
or TSETUP program to make sure that the PC card is compatible with the current
hardware configuration.
Qosmio F40/F45 Maintenance Manual 4-17
To Next Page
Loading...
