Toshiba Qosmio F40

4 Replacement Procedures 4.26 RJ11 Cable, TV Antenna Connector and B-CAS Card Slot
Installing the RJ11 cable, TV Antenna Connector and B-CAS card Slot
Install the RJ11 cable, TV Antenna Connector and B-CAS card Slot according to the
following procedures and Figure 4-42.
1. Seat the B-CAS card slot in the correct position.
2. Secure the B-CAS card slot with four M2x3 black flat head screws.
3. Seat the TV antenna connector in the correct position.
4. Secure the l TV antenna connector with one M2.5x4 white flat head screw.
5. Seat the RJ11cable in the correct position.
6. Route the RJ11cable in the wire guide.
4-76 Qosmio F40/F45 Maintenance Manual