4 Replacement Procedures 4.1 General
Removing the B-CAS Card (For JAPAN model only)
Remove the memory card according to the following procedures and Figure 4-5, after
checking that the computer is turned off in boot mode.
1. Open the card cover.
2. Pull the B-CAS card to be removed, grasp it and pull it out.
B CAS card
or
Smart card
-
B CAS cover-
M2x4 flat head screw
Figure 4-5 Removing the B-CAS card
4-16 Qosmio F40/F45 Maintenance Manual
To Next Page
Loading...
