4 Replacement Procedures 4.18 Display Mask
Installing the Display Mask
Install the display mask according to the following procedures and Figure 4-33.
1. Seat the display mask in the correct position and secure the following 31 latches, in
that order:
- Eight top latches
- Five latches on each of the left and right sides
- Thirteen bottom latches
2. Secure the display mask with the following 4 screws, in that order:
- Two M2.5x4.5 white flat head screws on the top
- Two M2.5x4.5 white flat head screws on bottom
3. Secure the following 4 seals to cover the screws, in that order:
- Two black seals on the bottom
- Two black seals on the top
4-60 Qosmio F40/F45 Maintenance Manual
To Next Page
Loading...
Need help?
General