4 Replacement Procedures 4.25 Switch Board and Volume Board
Install the Switch Board and Volume Board
Install the switch board according to the following procedures and Figures 4-12.
1. Connect the switch board flat cables to CN8000 on the switch board.
2. Seat the switch board in the correct position.
3. Secure the switch board with two M2x3 black flat head screws.
4. Connect the volume board flat cables to CN8000 on the volume board
5. Seat the volume board in the correct position.
6. Secure the volume board with two M2x2 black flat head screws.
4-74 Qosmio F40/F45 Maintenance Manual
To Next Page
Loading...
