- 10 -
h MAINTENANCE COUNTER: Indicates the values for various counters such as the label
distance covered. (The display is updated every 3 seconds.)
• TOTAL FEED: ∗.∗ km (Total label distance covered)
• FEED: ∗.∗ km (Label distance covered)
• PRINT: ∗.∗ km (Print distance)
• CUT COUNT: ∗∗∗∗ (Cut count)
• HEAD UP/DOWN COUNT: ∗∗∗∗ (Head up/down count)
• RIBBON WORK TIME: ∗∗h (Ribbon motor drive time)
• SOLENOID WORK TIME: ∗∗h (Head-up solenoid drive time)
• RS-232C ERROR COUNT: ∗∗∗∗ (RS-232C communication error count)
• SYSTEM ERROR COUNT ∗∗∗∗ (System error count)
• POWER FAILURE COUNT: ∗∗∗∗ (Momentary power interruption count)
Examples for status display are shown on the following pages.
To Next Page
Loading...
