Toshiba TEC B-SX4T - Mail Reception Specifications; Setup

- 42 -
10.5 MAIL RECEPTION SPECIFICATIONS
10.5.1 Setup
(1) Register the printer account in the mail server.
(2) Describe the required information for mail reception in the setup file.
The setup file should be saved as “pop3.ini” in the “mail” folder in the ATA card.
How to describe the setup file is as follows:
• IP address setting of the mail server
Format HOST_IP=123.456.789.012
Set the IP address of the mail server.
• Port for POP3
Format PORT=110
Set the port to be used for POP3. Normally, “110” should be set.
• Mail account of the printer
Format USER=bsx
Set the mail address of the printer. Max. 300 bytes are available.
• Password for the mail account of the printer
Format PASSWORD=barcode
Set the password for the mail account of the printer. Max. 300 bytes are available.
• Mail check interval
Format CHECKINTERVAL=10
Set the interval that the printer checks for new e-mail every what seconds
Range: 0 to 42,949,672 sec. (= Approximately 12,000 hours)