Toshiba TEC B-SX4T - 9 Ftp Server; Ftp Server Function; Requirements; Connection Diagram

- 32 -
9. FTP SERVER
9.1 FTP SERVER FUNCTION
This is the function that files can be read/written from/to the ATA card installed on the printer, using the
standard protocol, FTP (File Transfer Protocol). Users are divided into two types, administrator and
user. The administrator has access to all files. Users other than the administrator are restricted the
access. Print jobs can be stored in the ATA card by sending the command file to the printer via FTP.
9.2 REQUIREMENTS
• LAN connection environment
Either 1) or 2) is required for LAN connection.
1) PC card
• PCMCIA board (B-9700-PCM-QM)
• LAN PC card (3CCE589ET manufactured by 3COM)
2) Interface board
• LAN interface board (B-9700-LAN-QM)
• ATA card (Conforming to the PC CARD ATA Standard)
• Password file “\pass\pass.txt” (/ATA0/PASS/PASS.TXT)
9.3 CONNECTION DIAGRAM
(1) PC card
PCMCIA
board
CPU board
LAN card
ATA card
Printer
TCP/IP
Rear side of printer
Centronics connector
Slot 1 (Insert the ATA card into this slot.)
Slot 2 (Insert the LAN card into this slot.)
RS-232C connector
PCMCIA interface board