Toshiba TEC B-SX4T - Example of Setup File

- 40 -
10.4.3 Example of Setup File
(1) “\mail\smtp.ini” file (/ATA0/MAIL/SMTP.INI)
A line starting with # means a comment line and is not processed.
# IP address of mail server
HOST_IP=123.456.789.012
# mail address of B-SX printer
FROM_USR=bcpbsxa@foo.toshibatec.co.jp
# SMTP port default=25
PORT=25
# Send back response mail to sender
RESMAIL=1
# Head close
ENABLE00=1
TO_USR00=abc@foo.toshibatec.co.jp
TEXT_BODY00=/ATA0/MAIL/TEXT/STS00.TXT
# Head open
ENABLE01=1
TO_USR01=abc@foo.toshibatec.co.jp
TEXT_BODY01=/ATA0/MAIL/TEXT/STS01.TXT
# Command error
ENABLE06=1
TO_USR06=abc@foo.toshibatec.co.jp
TEXT_BODY06=/ATA0/MAIL/TEXT/STS06.TXT
# Serial port error
ENABLE07=1
TO_USR07=abc@foo.toshibatec.co.jp
TEXT_BODY07=/ATA0/MAIL/TEXT/STS07.TXT
# Paper jam
ENABLE11=1
TO_USR11=abc@foo.toshibatec.co.jp
TEXT_BODY11=/ATA0/MAIL/TEXT/STS11.TXT
# Cutter error
ENABLE12=1
TO_USR12=abc@foo.toshibatec.co.jp
TEXT_BODY12=/ATA0/MAIL/TEXT/STS12.TXT
# No paper
ENABLE13=1
TO_USR13=abc@foo.toshibatec.co.jp
TEXT_BODY13=/ATA0/MAIL/TEXT/STS13.TXT
# No ribbon
ENABLE14=1
TO_USR14=abc@foo.toshibatec.co.jp
TEXT_BODY14=/ATA0/MAIL/TEXT/STS14.TXT
# Feed while head open
ENABLE15=1
TO_USR15=abc@foo.toshibatec.co.jp
TEXT_BODY15=/ATA0/MAIL/TEXT/STS15.TXT
# Head error