- 18 -
7.4.6 Changing Parameters
(1) Select “PARAMETER SETTING” from the menu at the left of the window.
Enter the user name and the password in the PARAMETER SETTING LOGIN display.
If they are entered correctly, the parameter setting display appears.
The user name and the password to be entered here must be the same as the administrator
name and password described in the “\pass\pass.txt” file (/ATA0/PASS/PASS.TXT).
For details on how to describe the password file, refer to section 9.4 “FTP Server
Specifications”.
To Next Page
Loading...
