Toshiba TEC B-SX4T - 8 Socket Communication; Requirements; Connection Diagram

- 29 -
8. SOCKET COMMUNICATION
If the LAN connection environment has been provided and the socket communication is enabled when
the power is turned on, this printer starts up the socket communication server task.
8.1 REQUIREMENTS
• LAN connection environment
Either 1) or 2) is required for LAN connection.
1) PC card
• PCMCIA board (B-9700-PCM-QM)
• LAN PC card (3CCE589ET manufactured by 3COM)
2) Interface board
• LAN interface board (B-9700-LAN-QM)
8.2 CONNECTION DIAGRAM
(1) PC card
There are 2 slots (Slot 1 and Slot 2) for PC cards on the PCMCIA board.
Insert the LAN card into Slot 2. If it is inserted into Slot 1, it does not work.
PCMCIA
board
CPU board
LAN card
TCP/IP
Printer
Rear side of printer
Centronics connector
Slot 1
Slot 2 (Insert the LAN card into this slot.)
RS-232C connector
PCMCIA interface board