- 1 -
1. SCOPE
This specification applies to the network for the B-SX4T and the B-SX5T general purpose thermal
label/tag printers.
2. GENERAL DESCRIPTION
With the optional PCMCIA board (B-9700-PCM-QM) and either the LAN card or the optional LAN
interface board (B-9700-LAN-QM), the B-SX4T and the B-SX5T can be connected to the host by using
TCP/IP.
NOTE: If the ATA card has been inserted in Slot 1 on the PCMCIA board, be sure to press the
[PAUSE] key before turning the printer OFF. (For more details, see chapter 12 “NOTES ON
USING NETWORK FUNCTION”.)
3. APPLICABLE PROTOCOL
TCP/IP
4. IP ADDRESS SETTING
Each IP address should be set by using a command or in the system mode.
Initial value at shipment Remark
Printer IP address 192. 168. 10. 20
Gateway IP address 0. 0. 0. 0
Subnet mask 255. 255. 255. 0
Socket communication port OFF 8000
5. NETWORK SPECIFICATIONS
This printer has the functions of the LPR server, Web printer, socket communication, FTP server, mail
transmission/reception, and DHCP client, as the network specifications.
To Next Page
Loading...
