Toshiba TEC B-SX4T - 6 Lpr Server; Requirements; Connection Diagram

- 2 -
6. LPR SERVER
If the LAN card has been inserted into Slot 2 on the PCMCIA board, when the power is turned on or the
LAN interface board has been installed, this printer starts up the printer daemon task.
6.1 REQUIREMENTS
• LAN connection environment
Either 1) or 2) is required for LAN connection.
1) PC card
• PCMCIA board (B-9700-PCM-QM)
• LAN PC card (3CCE589ET manufactured by 3COM)
2) Interface board
• LAN interface board (B-9700-LAN-QM)
6.2 CONNECTION DIAGRAM
(1) PC card
There are 2 slots (Slot 1 and Slot 2) for PC cards on the PCMCIA board.
Insert the LAN card into Slot 2. If it is inserted into Slot 1, it does not work.
PCMCIA
board
CPU board
LAN card
TCP/IP
Printer
Rear side of printer
Centronics connector
Slot 1
Slot 2 (Insert the LAN card into this slot.)
RS-232C connector
PCMCIA interface board