- 44 -
10.6 STORING PRINT JOBS
To store a file as a real-time print job, attach a file to be stored as a print job to e-mail, input the
subject including “PRTDATA:”, then send e-mail to the printer. When receiving e-mail, the printer
stores the attached file as a real-time print job.
To store a file as a spooled print job, attach a file to be stored as a print job to e-mail, input the
subject including “PRTPOOL:”, then send e-mail to the printer. When receiving e-mail, the printer
stores the attached file as a spooled print job.
For the spooler function, see section 7.4.7.
NOTES: 1. If any subject other than “PRTDATA:” and “PRTPOOL:” is described, the printer prints
an attached file immediately when receiving e-mail. The file is not stored in the ATA
card as a print job. For more details on the spooler function, refer to section 7.4.7.
2. If the same print job name (file name) as the existing file is used, the new data will
overwrite.
3. When “PRTDATA:” or “PRTPOOL:” is included in a subject, be sure to place
“PRTDATA:” or “PRTPOOL:” at the beginning of the subject.
To Next Page
Loading...
