3.3 Setting of the hardware configuration 3 Tests and Diagnostics
TECRA M3 Maintenance Manual (960-507) 3-11
Subtest 08 System configuration display
This subtest displays the information of the system configuration.
When the following message appears, confirm the contents and press Enter.
Press [Enter] key
For more details on the system configuration information, refer to “3.25 System
configuration”.
Subtest 09 E2PROM test (MAC/GUID/DMI)
It checks whether the MAC address, GUID of IEEE1394 and DMI
information are written.
To Next Page
Loading...
