Toshiba Tecra M3 - Appendix A Handling the LCD Module

Appendix A Handling the LCD Module Appendices
TECRA M3 Maintenance Manual (960-507) A-1
Appendix A P
Appendix A Handling the LCD Module
Precautions for handling the LCD module
The LCD module can be easily damaged during assembly or disassembly. Observe the following
precautions when handling the LCD module:
1. When installing the LCD module in the LCD cover, be sure to seat it so that it is properly
aligned and maximum visibility of the display is maintained.
2. For the LCD module, be careful to align the four holes at the right side and left side of the
LCD module with the corresponding holes in the LCD cover before securing the module
with four screws.
Do not force the module into place, because stress can affect its performance.
Also, the panel’s polarized surface is easily scarred, so be carefully when handling it.