Appendices Appendix C Pin Assignments
C-28 TECRA M3 Maintenance Manual (960-507)
C.17 CN8800 DC-IN connector (4-pin)
Table C-17 DC-IN connector (4-pin)
Pin No. Signal Name I/O Pin No. Signal Name I/O
1 ADPDC - 2 ADPDC -
3 GND - 4 GND -
C.18 CN8810 1st Battery connector (10-pin)
Table C-18 1st Battery connector (10-pin)
Pin No. Signal Name I/O Pin No. Signal Name I/O
1 (PVBL1) - 2 BTMP1 I
3 (DCHG) - 4 M5V -
5 PSCL-S5P I/O 6 PSDA-S5P I/O
7 GND - 8 DBT10V-S5N I
9 GND - 10 GND -
C.19 CN9990 RTC Battery connector (3-pin)
Table C-19 RTC Battery connector (3-pin)
Pin No. Signal Name I/O Pin No. Signal Name I/O
1 ZS-PWCHKF - 2 NC -
3 GND -
C.20 CN8770 FAN interface connector (3-pin)
Table C-20 FAN interface connector (3-pin)
Pin No. Signal Name I/O Pin No. Signal Name I/O
1 (P5V) - 2 GND -
3 FANG-P3P O
To Next Page
Loading...
