Toshiba Tecra M3 - Cover; Touch Pad

4.9 Cover / Touch pad 4 Replacement Procedures
TECRA M3 Maintenance Manual (960-507) 4-27
4 Replacement Procedures
4.9 Cover / Touch pad
Removing the Cover / Touch pad
To remove the cover/touch pad, follow the steps below and refer to Figure 4-15 to 4-20.
1. Turn the computer face down and remove the following screws.
? M2.5?4B FLAT HEAD screw ?1 (“4B” in the figure below)
? M2.5?6B FLAT HEAD screw ?7 (“6” in the figure below)
? M2.5?16B FLAT HEAD screw ?1 (“16” in the figure below)
? M2?4Z S-FLAT HEAD screw ?1 (“4” in the figure below)
or
? M2?4 Stick screw ?1 (“4” in the figure below)
Figure 4-15 Removing the cover (1)
16
4B
6
6
6
6
4
6
6
6