4 Replacement Procedures 4.13 Display assembly
4-40 TECRA M3 Maintenance Manual (960-507)
4.13 Display assembly
Removing the Display assembly
To remove the display assembly, follow the steps below and refer to Figure 4-24 to 4-27.
1. Turn the computer face down, and remove the following screws.
? M2.5?16B FLAT HEAD screw ?2
? M2.5?6B FLAT HEAD screw ?2
Figure 4-24 Removing the display assembly (1)
M2.5?16B FLAT HEAD
M2.5?6B FLAT HEAD
To Next Page
Loading...
