3.24 Floppy Disk Drive Utilities 3 Tests and Diagnostics
TECRA M3 Maintenance Manual (960-507) 3-53
3.24.2 Operations
1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following
message.
[ FDD UTILITIES ]
1 - FORMAT
2 - COPY
3 - DUMP
4 – HDD-ID READ
9 - EXIT TO DIAGNOSTICS MENU
2. FORMAT program
(a) Selecting FORMAT displays the following message.
DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?
(b) Select a drive number to display the following message.
Type select (0:2DD, 3:2HD) ?
(c) Select a media/drive type number and press Enter. A message similar to the one
below will be displayed.
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
(d) Remove the Diagnostics Disk from the FDD, insert the work disk and press any
key.
The following message will be displayed when the FDD format is executed.
[ FDD TYPE ] : TRACK = XXX
[ FDD TYPE ] : HEAD = X
[ FDD TYPE ] : SECTOR = XX
Format start
[[track, head = XXX X]]
After the floppy disk is formatted, the following message will appear.
Format complete
Another format (1:Yes/2:No) ?
(e) Typing 1 displays the message from step (c) above. Typing 2 returns the test to the
DIAGNOSTIC MENU.
To Next Page
Loading...
