3 Tests and Diagnostics 3.30 Sound Test program
3-88 TECRA M3 Maintenance Manual (960-507)
Press any key and stop the narration. Then return to the CD Sound (Standard) test
menu.
Subtest 02 English Narration
Selected this subtest, narration in English starts.
For more details on the procedure, refer to the subtest01.
Subtest 03 Test Tone A
Caution: Before starting subtest03, be sure to set the sound at proper volume.
This subtest plays sine wave while changing its table from 100Hz to 20Hz.
The test returns to the CD Sound (Standard) menu after the test ends.
Subtest 04 Test Tone B
This subtest plays sine wave while changing its table from 400Hz to 3KHz and also
changing the channel from left speaker to right speaker.
The test returns to the CD Sound (Standard) menu after the test ends.
To Next Page
Loading...
