4.7 Keyboard 4 Replacement Procedures
TECRA M3 Maintenance Manual (960-507) 4-23
2. Turn the computer face up and open the display panel.
3. Insert your fingers into the latches between the keyboard holder and the computer, and lift
up the keyboard holder to unlatch and remove it.
4. Remove the following screws securing the keyboard.
? M2.5?2.8B FLAT HEAD screw ?2
Figure 4-10 Removing the keyboard holder and screws
M2.5?2.8B FLAT HEAD
M2.5?2.8B FLAT HEAD
Keyboard holder
To Next Page
Loading...
