4 Replacement Procedures 4.23 LCD unit / FL inverter
4-68 TECRA M3 Maintenance Manual (960-507)
3. Remove the following screw securing the FL inverter.
? M2?4Z S-FLAT HEAD screw ?1
4. Peel the insulator.
5. Disconnect the FL cable under the insulator and the HV cable from the FL inverter.
6. Remove the FL inverter.
Figure 4-48 Removing the FL inverter
Insulator
M2?4Z S-FLAT HEAD
FL inverter
FL cable
HV cable
To Next Page
Loading...
