4 Replacement Procedure 4.26 Fluorescent Lamp
4-86 TECRA M3 Maintenance Manual (960-507)
4.26.1 Replacing the 14.1-inch XGA Samsung Fluorescent Lamp
CAUTION: When replacing the fluorescent lamp, wear finger covers or gloves to avoid
contaminating or damaging the LCD panel. Be careful not to let dust or
other foreign substance into the module.
Disassembling the 14.1-inch XGA Samsung Fluorescent Lamp
To disassemble the 14.1-inch XGA Samsung fluorescent lamp, follow the steps below and refer to
Figure 4-58 to 4-68.
1. Remove the PCB cover and COF cover.
CAUTION: Handle with care not to damage the COF of S/D and G/D ICs.
Figure 4-58 Replacing Samsung fluorescent lamp (XGA) (1)
PCB Cover
COF Cover
To Next Page
Loading...
