Toshiba Tecra M4 - Page 310

4.32 Fluorescent lamp 4 Replacement Procedure
Removing the screws
1. Spread out the insulation sheet without detaching it from the side of the bezel.
2. Remove the four screws (1).
CAUTION: 1. To unfasten the screws, use an insert bit of point size 0 for Philips
screwdrivers.
2. Do not remove the insulation sheet to reuse it.
(1)
(1)
(1)
(1)
Figure 4-50 Replacing 14.1 Inch TMD fluorescent lamp (2)
TECRA M4 Maintenance Manual (960-521) [CONFIDENTIAL] 4-79