TP-Link JetStream T1500G-10MPS - Quality of Service (QoS)


Network Requirements
Multicast source sends multicast streams via the router, and the streams are transmitted to
user A and user B through the switch.
Router: Its WAN port is connected to the multicast source; its LAN port is connected to the
switch. The multicast packets are transmitted in VLAN3.
Switch: Port 3 is connected to the router and the packets are transmitted in VLAN3; port 4 is
connected to user A and the packets are transmitted in VLAN4; port 5 is connected to user B
and the packets are transmitted in VLAN5.
User A: Connected to Port 4 of the switch.
User B: Connected to port 5 of the switch.
Configure a multicast VLAN, and user A and B receive multicast streams through the multicast
VLAN.

Network Diagram

Configuration Procedure
Step
Operation
Description
1 Create VLANs Create three VLANs with the VLAN ID 3, 4 and 5 respectively,
and specify the description of VLAN3 as Multicast VLAN on
VLAN→802.1Q VLAN page.
102