TP-Link JetStream T1500G-10MPS - Mac Acl

Choose the menu ACL→ACL Config→ACL Create to load the following page.
Figure 11-2 ACL Create
The following entries are displayed on this screen:

Create ACL
ACL ID:
Enter ACL ID of the ACL you want to create.
Rule Order:
User Config order is set to be match order in this ACL.
11.1.3 MAC ACL
MAC ACLs analyze and process packets based on a series of match conditions, which can be
the source MAC addresses and destination MAC addresses carried in the packets.
Choose the menu ACL→ACL Config→MAC ACL to load the following page.
Figure 11-3 Create MAC Rule
The following entries are displayed on this screen:

Create MAC ACL
ACL ID:
Select the desired MAC ACL for configuration.
Rule ID:
Enter the rule ID.
Operation:
Select the operation for the switch to process packets which match
the rules.
 Permit: Forward packets.

Deny: Discard Packets.
S-MAC:
Enter the source MAC address contained in the rule.
136