TP-Link JetStream T1500G-10MPS - HTTP Config

Choose the menu System→Access Security→Access Control to load the following page.
Figure 4-16 Access Control
The following entries are displayed on this screen:

Access Control Config
Control Mode: Select the control mode for users to
log on to the Web
management page.
 Disable: Select to disable Access Control function.
 IP-based: Select this option to limit the IP-
range of the users
for login.
 MAC-
based: Select this option to limit the MAC Address of
the users for login.

Port-based: Select this option to limit the ports for login.
Access Interface:
Select the interface for access control to apply.
IP Address & Mask These fields is available to configure only when IP-
based mode
is selected. Only the users within the IP-range you set he
re are
allowed for login.
MAC Address: The field is available to configure only when MAC-
based mode is
selected. Only the user with this MAC Address you set here are
allowed for login.
4.4.2 HTTP Config
With the help of HTTP (Hyper Text Transfer Protocol), you can manage the switch through a
standard browser. The standards development of HTTP was coordinated by the Internet
Engineering Task Force and the World Wide Web Consortium.
On this page you can configure the HTTP function.
28