Chapter 15 Maintenance
Maintenance module, assembling the commonly used system tools to manage the switch,
provides the convenient method to locate and solve the network problem.
（1） System Monitor: Monitor the utilization status of the memory and the CPU of switch.
（2） Log: View the configuration parameters of the switch and find out the errors via the
Logs.
（3） Device Diagnostics: Cable Test tests the connection status of the cable to locate and
diagnoses the trouble spot of the network. Loopback tests whether the ports of the
switch and its peer device are available.
（4） Network Diagnostics: Test whether the destination device is reachable and detect the
route hops from the switch to the destination device.
15.1 System Monitor
System Monitor functions to display the utilization status of the memory and the CPU of switch
via the data graph. The CPU utilization rate and the memory utilization rate should fluctuate
stably around a specific value. If the CPU utilization rate or the memory utilization rate increases
markedly, please detect whether the network is being attacked.
The System Monitor function is implemented on the CPU Monitor and Memory Monitor
pages.
15.1.1 CPU Monitor
Choose the menu Maintenance→System Monitor→CPU Monitor to load the following page.
219
To Next Page
Loading...
